Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Pulsar PCB Fab System. An y good?

From: Brian Lalor <blalor@...>
Date: 2010-01-08

On Fri, 8 Jan 2010 18:28:28 +0100, Stefan Trethan <stefan_trethan@...>
wrote:

> Off-brand cartridges never worked for me, but the stripe could be bad,
> maybe something on the mirror/laser assembly?
> Try taking the cartridge out and shake it to spread the toner evenly
> over the width, then print a couple of pages all black.

I've shaken, rattled, and rolled those cartridges to within an inch of
their lives! I'll give it one more go before giving up.

> I also buy toner on ebay, with a little patience I've always found
> genuine brand toner well below the normal price. This comes from
> people who don't have the printer any more and stuff like that, expiry
> date doesn't seem to matter but brand does.

New 27X cartridges are around $125, and new 27A cartridges are about $100.
The 27X goes for 50-60 on eBay with free shipping for an official HP one,
but if I still have other problems I'm just throwing good money after bad.
This was intended to be a cheap purchase... :-)

--
Brian Lalor
blalor@...