You can only do it this way in the library editor, not the PCB layout.
You might be able to trick it with design rules....
ST
On Thu, Nov 19, 2009 at 2:12 PM, Andrew Mathison
<
andrewdavid.mathison@...> wrote:
> Dear Billshat44
>
> in Eagle (haven't done it for years!) you select a "Change" and change pad sizes to what you want.......up to over 0.5" if necessary!!
>
> Look in help, you should use PAD as a search and you will find all the infos you need, including:-
>
> The pad shape or diameter can be selected while the PAD command is active, or it can be changed with the CHANGE command, e.g.:
> CHANGE SHAPE OCTAGON .The drill size may also be changed using the CHANGE command. The existing values then remain in use for successive pads.
>
>
>
> I hope this helps,
>
>
>
> Andy
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>