Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date	index	next by date
previous in topic	topic list	next in topic

Subject: Re: [Homebrew_PCBs] office guillotine for PCB

From: DJ Delorie <dj@...>
Date: 2009-10-15

I use an X-Acto paper cutter to cut some of my FR4, but it's difficult
to do with the 0.8mm sheets much less 1.6. I use it on the 8 mil
(0.2mm) and 16 mil (0.4mm) sheets only now, and use a scroll saw for
the thicker stuff.