The thermometer stabilized at 294F. Too cold? Too Hot?
I checked it 2 places on the input side of the rollers.
Mike
--- In Homebrew_PCBs@yahoogroups.com, "sailingto" <sailingto@...> wrote:
>
> Did you get a temperature on the rollers at the exit point?
>
> I've sorta settled on magazine paper for now - it just works too good. The little bit of text I've had to transfer has not been a problem - seems like the acid etched thru it? I don't remember, but don't remember a problem.
>
> Still having fun!! Ken H.
>
>
> --- In Homebrew_PCBs@yahoogroups.com, "Mike Phillips" <mikep_95133@> wrote:
> >
> > I used HP Q7852A HP Advanced Photo Paper for a test today. It sticks like glue to the copper. So bad in fact that after a about 1-2 hours of soaking it still won't separate from the copper. It acts as though it has plastic in it. After about the 5 passes, some chunks of coating were pulled from the photo paper. Maybe too hot?? I could not find any of the paper listed in our database by part number. Checked 3 stores. I suspect most of them have been obsoleted to something newer. Time to find something more recent.
> >
> > I think I'll go back to my magazine paper and turn the heat down a bit. It was actually transferring some of the text from the page as well as the toner.
> >
> > Mike
> >
>