Richard,
Does DipTrace have the ability to print mirror images?
I see the free version has a 250 pin limit. Looking around the web site,
I did not find a definition of "pin." What does it mean?
Thanks.
Steve K8JQ
RICHARD HEILIGER wrote:
> I have tried moving the graphic images from the express pcb program into several other graphic programs. The scaling seems to be different between them and I usually ended up with a top pattern that didn't match the bottom pattern. The only way I have found to be accurate is that I use the DXF output for my top silk screen layer, I invert it in a cad program. Unfortunately the DXF output will not output the top copper layer.
>
> I gave up and now use the free pcb programs from Eagle or DipTrace for double sided boards. Both have the ability to print any layer. I think the libraries in either are a pain to use, and end up making most of my own components.
>
> Rd
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>
>
--
Read The Patriot Post
hppt://PatriotPost.US/Subscribe/ Vetitas vos Liberabit