Hi, i have written a long reply on the group webpage, but because tecnical reason, no delivery was possible, so here a short reply.
I have experimented with pyrrol based THP. I´m not shure, but if
i remember correclty, the source speakes about a plastic
polymerisation process with some activator, but i could remember wrong.
The average results was 800 Ohm of conductivity, but always under 1kohm
I want use the bungard chemistry.
Solar furnace or evaporation could be a good possibility.
Don´t use refrigerator compresser, use instead a double stage ventury aspirator, (water outlet type) 5€. If you want go with the compressor,
you need two stages.
sorry for the short answer.
--
GMX FreeDSL Komplettanschluss mit DSL 6.000 Flatrate und Telefonanschluss
für nur 17,95 Euro/mtl.!∗
http://portal.gmx.net/de/go/dsl02