Thanks again Malcolm.
I can print with a pdf driver and produce a pdf document. Still trying
to figure out how to flip or mirror image it for printing on a non-Post
Script printer. If anyone knows how to do that, I'd like to hear of it.
Steve K8JQ
Malcolm Parker-Lisberg wrote:
> Pads, unless surface mount pads, or specified as one layer only, appear on all track layers. Do a little experimental circuit with surface mount pads, through hole pads and non symmetrical text to see the effect. I have attached a pcb with top surface mount component, top tracks, text and through components. If you select it all and move it to the bottom layer then print out the bottom layer, all is ok, except the surface mount component does not appear.
> If your board has surface mount components you need to find the printer driver that pretends it's a pdf printer and print to that, by making it your default printer, to produce a PDF of the board. You can then reverse that by printing from a pdf reader programme. Non 1:1 scaling can be a result of this process and you may need to alter the printer scaling to get it the right size.
> If you are using photo sensitised board the problem is reversed as you need the emulsion surface to print toner to ensure the best resolution. Some printers have a transparency option and will print in reverse when this option is selected.
>
>
>
>
>
>
> --- On Wed, 6/10/09, Steve <steve65@...> wrote:
>
> From: Steve <steve65@...>
> Subject: Re: [Homebrew_PCBs] ExpressPCB software mirror image?
> To: Homebrew_PCBs@yahoogroups.com
> Date: Wednesday, June 10, 2009, 12:49 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Thanks for the help Malcolm.
>
>
>
> The board was developed by someone else and I'm getting the ExpressPCB
>
> info from his web site. The board is two-sided.
>
>
>
> I am able to print the bottom layer as you suggest and it is mirrored.
>
> And then I can delete the bottom layer.
>
>
>
> Moving the top layer to the bottom layer has not been successful as of
>
> yet. Much of the top layer will move to the bottom layer, but every pad
>
> stays on top. Is there a property that is set or perhaps something else
>
> that prevents the pads from moving to the bottom layer?
>
>
>
> Thanks,
>
>
>
> Steve K8JQ
>
>
>
> Malcolm Parker-Lisberg wrote:
>
>
>> Save a copy of the board, if it is two sided, under another name. Using the renamed copy, first print only the bottom layer, it comes out reversed for use with TT. Delete the bottom layer and if you move all the top layer to the bottom layer you can now print that out and it will be reversed for TT.
>>
>
>
>
>
>
>
>
>
>> --- On Mon, 6/8/09, Steve <steve65@suddenlink. net> wrote:
>>
>
>
>
>
>> From: Steve <steve65@suddenlink. net>
>>
>
>
>> Subject: [Homebrew_PCBs] ExpressPCB software mirror image?
>>
>
>
>> To: Homebrew_PCBs@ yahoogroups. com
>>
>
>
>> Date: Monday, June 8, 2009, 1:07 AM
>>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>>
>>
>
>
>>
>>
>
>
>>
>>
>
>
>
>
>
>
>>
>>
>
>
>> Is there a way to use the ExpressPCB software to print a mirror image of
>>
>
>
>
>
>> the board for toner transfer? I've looked through the software and its
>>
>
>
>
>
>> help file without finding anything about the topic.
>>
>
>
>
>
>
>
>
>
>> Thanks.
>>
>
>
>
>
>
>
>
>
>> Steve K8JQ
>>
>
>
>
>
>
>
>
>
>>
>>
>
>
>
>
--
Read The Patriot It's Right -- It's Free
http://PatriotPost.US/subscribe/ Veritas vos Liberabit