Thanks for the help Malcolm.
The board was developed by someone else and I'm getting the ExpressPCB
info from his web site. The board is two-sided.
I am able to print the bottom layer as you suggest and it is mirrored.
And then I can delete the bottom layer.
Moving the top layer to the bottom layer has not been successful as of
yet. Much of the top layer will move to the bottom layer, but every pad
stays on top. Is there a property that is set or perhaps something else
that prevents the pads from moving to the bottom layer?
Thanks,
Steve K8JQ
Malcolm Parker-Lisberg wrote:
> Save a copy of the board, if it is two sided, under another name. Using the renamed copy, first print only the bottom layer, it comes out reversed for use with TT. Delete the bottom layer and if you move all the top layer to the bottom layer you can now print that out and it will be reversed for TT.
>
>
>
> --- On Mon, 6/8/09, Steve <steve65@...> wrote:
>
> From: Steve <steve65@...>
> Subject: [Homebrew_PCBs] ExpressPCB software mirror image?
> To: Homebrew_PCBs@yahoogroups.com
> Date: Monday, June 8, 2009, 1:07 AM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Is there a way to use the ExpressPCB software to print a mirror image of
>
> the board for toner transfer? I've looked through the software and its
>
> help file without finding anything about the topic.
>
>
>
> Thanks.
>
>
>
> Steve K8JQ
>
>
>
>
--
Read The Patriot It's Right -- It's Free
http://PatriotPost.US/subscribe/ Veritas vos Liberabit