Is the purpose of the shear to cut PCB's?
It's instruction manual says it will shear up to 20ga metal, which is
0.035in. Seems that if I were to get a shear (and I have thought about
it), I'd want to cut 0.062in PCB material, which the model referenced
below will not do . . . unless I'm missing something?
Steve
DJ Delorie wrote:
> Harvey White <madyn@...> writes:
>
>
>> Be wary, that sucker is very heavy, so you need a good place to put
>> it, a way to get it up there, and a good light.
>>
>
> I've got a full woodshop already, including an 8" long bed jointer, so
> I'm already prepared for those types of issues.
>
> I was thinking of this model: http://www.grizzly.com/products/g6089
>
> It's halfway between the tiny HF model and the big 30" model. My
> blank PCB stock is at most 9x12.
>