> > I am not seeing any differences in the way it etches or develops. All I
> can
> > tell you about the material is that it is the green coating and that I
had
> > the stock with the red tinted coating in the past and it did not last
very
> > long like what you have described.
> > -Mike
>
> Is your material negative-working? It looks as though that lasts longer
than
> the positive stuff I use.
>
> Leon
No, It is the positive etch. It does, however have a sheet of plastic film
that you have to peel from the positive etch side of the board whereas the
other type that I had poor results with was only in a bag. Perhaps this has
something to do with the different types of positive etch boards. The
plastic stuck to the board might keep the etch resist fresh or more
protected from the environment.
-Mike