Hi Steve,
I looked at fireballcnc, but it seems that there is no machine with even
close parameters to the necessary for PCB. For DIY purposes they may be
sufficient, but for fine operations no! And
something else
they does not have software which is not at all a small
problem, especially for CNC PCB machine!
And a Dremel for spindle is not good enough.
I studied the question and reached the conclusion that a good CNC
machine must obligatory have depth limiter and a foot. The real Z axis
gives much other advantages (in front of pseudo Z axis in the cheaper
LPKF), but without depth limiter there is no way to use V instruments
for isolation (5-8 mils)!
I like very much the Z axis of Accurate 360:
(www.accuratecnc.com/Pictures/Small/A360_z-axis.jpg
<
http://www.accuratecnc.com/Pictures/Small/A360_z-axis.jpg> ) it
looks solidly made, exactly for fine operations like PCB.
Peter
--- In Homebrew_PCBs@yahoogroups.com, "Steve" <alienrelics@...> wrote:
>
> The Fireball is great, especially if you want to save a few dollars
> by assembling it yourself. It does more than PCBs, too.
>
> Steve Greenfield
>
> --- In Homebrew_PCBs@yahoogroups.com, "Herbert E. Plett"
> cachureos@ wrote:
> >
> >
> > take a look at
> > http://www.fireballcnc.com/
> > http://groups.yahoo.com/group/Fireballcnc/
> >
> >
> >
> > --- On Thu, 2/26/09, rf33333 rf33333@ wrote:
> > > Hi,
> > > I'm looking for good CNC machine for PCB. I found one
> > > www.accuratecnc.com <http://www.accuratecnc.com/>
> > > (Accurate 360)
> > > I think the machine is suitable for my needs (mainly
> > > prototyping):
> > > - 2 layers PCBs with QFP64/QFP100, 8 mils traces
> > > - full copper rubout (for our FR filters & antennas)
> > > - stencils
> > >
> > > What do you think about it ?
> > > (LPKF & T-TECH second hand are more expensive !)
> > >
> > > Thank you in advance !
> >
>
[Non-text portions of this message have been removed]