I want to try this for ages but never get around to it, if anyone
tries with TT let us know if you see a difference.
I have few problems with toner adhesion, but do need to sand the
boards with an abrasive pad. Maybe that could be dispensed with.
What i noticed is if you dip a board in etchant you will immediately
see any dirt on the surface, such like grease or oil.
ST
On Sun, Feb 1, 2009 at 6:54 PM, John Coppens <john@...> wrote:
> Now there's a good idea... and the dull surface may actually be better for
> accepting toner transfer too.
>
> Thanks,
> John
>