Juan,
How to use it greatly depends on the chemistry used. The chemistry even
defines howmany tanks you need, wether they are heated, the processing
parameters etc. etc. My best advice to you is to first organize a
chemistry, cause it's supplier will be able to tell you the processing
requierements. Then build your station along them.
HTH
Markus
Juan EA7FNJ schrieb:
>
> Hi guys!
>
> Ok, great machine! but, I can see how to make one but, where is the
> manual 'how to use it'?
>
> xD
>
> --- In Homebrew_PCBs@yahoogroups.com
> <mailto:Homebrew_PCBs%40yahoogroups.com>, "Steve" <alienrelics@...> wrote:
> >
> > Have you checked the Links under "Plated Through Holes" yet? Not many
> > links there, but it is something. Markus Zingg's page on through hole
> > plating has been down for a while, but I just found where someone
> > mirrored it and put that link in place of the missing site.
> >
> > http://tech.groups.yahoo.com/group/Homebrew_PCBs/links
> <http://tech.groups.yahoo.com/group/Homebrew_PCBs/links>
> >
> > If you find any other links on through-hole plating, please place them
> > there.
> >
> > Steve Greenfield
> >
>
>