"pgdion1" <
pgdion1@...> writes:
> every thing is either #75 or #59,
I find I use the #80 (13 mil) the most, because most of the holes I
need are vias! I cut up some 22 gauge stranded speaker wire and
de-strand it; the individual conductors are fine enough to fit through
a 13 mil hole just fine, and it's probably the cheapest wire I can
get.
Second most is the 26 mil bit, for the friction-fit pins I use to make
adapter boards. After that is whatever I need for whatever parts I'm
using.