Ben,
Make sure you can find the tap before you buy the threaded rod.
John
--- In
Homebrew_PCBs@yahoogroups.com, "ben_englund"
<ben_englund@t...> wrote:
> My reasons for wanting to use acme thread rod is that the nut binds
> less on it under load and so it should last longer ....could be
> wrong.....thought i'd do it that way cause getting acme thread rod
> through Enco is pretty cheap. I am also thinking of using two nuts
> loaded by a spring as was mentioned. Thanks for all the replys!
>
>
> Ben Englund