--- In
Homebrew_PCBs@yahoogroups.com, "Brian" <blue_eagle74@...> wrote:
>
> I searched for TT and got 1000's or returns, on this group and the
> web, so I thought I would ask here.
>
> I did a TT. Good results before. I have tried to peel the paper off
> when hot and it worked ok. Then I tried to let it cool and soak it in
> water then peel it off. Worked ok.
>
> My problem now is that when I soak it in water for 15 or so minutes I
> have parts of the traces not sticking to the board. I used rubber
> gloves during the whole process and cleaned the board with fingernail
> polish remover with acatone.
>
> Am I not heating it long enough (3 to 5 minutes with an iron) or not
> letting it soak long enough, tried cold and hot water?
>
> I am using kodak glossy paper.
>
> TT seams like a good way to go but I think I am doing something wrong.
>
> If anyone has a good proceedure I would like to try it.
>
> Brian
>
Hi Brian:
http://www.fullnet.com/~tomg/gooteepc.htm#1This is where I found that a PCB group existed!!!
The guy that has written that tutorial also did things on Youtube.
Ernesto