--- In
Homebrew_PCBs@yahoogroups.com, Michel Baguet <bagmik@...> wrote:
>
> I live in Belgium and the best I've found until now is the Premium
Plus HP Photo Paper higi-gloss for inkjet. It's more expensive than
any other paper but it works really well, down to a few mils (200um).
With a laminator set at 150°C, it needs 10 passes, let it cool down (a
few minutes) then peel off carefully. You don't need to soak it !
>
> --- On Tue, 10/21/08, Ernesto <ernesto_cordoba@...> wrote:
> From: Ernesto <ernesto_cordoba@...>
> Subject: [Homebrew_PCBs] Need hint on tonner transfer paper
> To: Homebrew_PCBs@yahoogroups.com
> Date: Tuesday, October 21, 2008, 7:57 PM
Hi Michel and thanks! I don't have a laminator, just an iron, but I'll
try the paper you recommend!!
Thanks!