lets we talk about the cost in dollar, so we know the best and the
cheapest one. I have "data print glossy paper" with good result for
toner transfer, it cost $2.3 /pack. one pack have 20 sheets..
--- In
Homebrew_PCBs@yahoogroups.com, Michel Baguet <bagmik@...>
wrote:
>
> I live in Belgium and the best I've found until now is the Premium
Plus HP Photo Paper higi-gloss for inkjet. It's more expensive than
any other paper but it works really well, down to a few mils (200um).
With a laminator set at 150°C, it needs 10 passes, let it cool down (a
few minutes) then peel off carefully. You don't need to soak it !
>
> --- On Tue, 10/21/08, Ernesto <ernesto_cordoba@...> wrote:
> From: Ernesto <ernesto_cordoba@...>
> Subject: [Homebrew_PCBs] Need hint on tonner transfer paper
> To: Homebrew_PCBs@yahoogroups.com
> Date: Tuesday, October 21, 2008, 7:57 PM
>
>
>
>
>
>
>
>
>
>
>
> Hi all!! I'm trying to make some pcb's using the tonner
transfer
>
> method. After ironing for about 6 minutes, the paper isn't completely
>
> glued on the board. The board was cleaned with acetone so I guess that
>
> the paper I'm using isn't appropriate.
>
> I know Staples paper work fine but I live in France and there isn't
>
> Staples products here :-((.
>
> Does anybody knows what paper commercialized in France works for this
>
> method? Or I must iron more until the paper completely melts on the
>
> board?
>
>
>
> THANKS!!!!!
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>