you cant cut through metal with these CO2 lasers. and if one has high enough
power to cut metal it will burn and char the pcb material. I have tried to
paint the board and laser the paint like a mask for etching, but lasering
the paint with the laser is actually burning the paint and it leaves some
residue on the copper so the end result was bad. Spotty etching and finer
etch lines are not possible. May be some sort of cleaning after lasering
might help but the other processes becomes more desirable at that stage..
Kim
----- Original Message -----
From: "Henry Liu" <henryjliu@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Sunday, September 21, 2008 3:29 PM
Subject: [Homebrew_PCBs] laser engraver for pcbs?
> Anyone try a laser engraver to make pcbs? You can buy a 40W CO2 off
> ebay for $1600 shipped. Not sure of the adsorption of copper at CO2
> wavelengths but seems like you could probably coat it if need be.
>
> Apparently the ebay ones just act like a print driver and whatever you
> print out, it does burns so can easily print Gerber files onto
> copperclad.
>
> Seems like it would be faster than the cnc mill method I'm using now...
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>