Archive of the former Yahoo!Groups mailing list: Homebrew PCBs

previous by date index next by date
previous in topic topic list next in topic

Subject: Re: [Homebrew_PCBs] Cutting a pcb

From: DJ Delorie <dj@...>
Date: 2008-08-29

If it were me, I'd use my scroll saw, but that would go through blades
pretty quickly, unless it's phenolic. FR4 is hard on saw blades.

If you start by drilling the holes at the bottoms of each cutout (11
big ones and 10 little ones) at least it would be all straight cuts
with the scroll saw.