In Target there is also a function like this to only print small
starter holes. Very useful for me.
It can probably be faked by setting the hole dia. really small, but if
you order PCBs from those files later you better not forget to correct
any!
ST
On Fri, Aug 8, 2008 at 4:06 PM, DJ Delorie <dj@...> wrote:
>
> Note that for home etching, you probably do NOT want the holes etched.
> Or at least, you want much smaller holes etched. If you etch a hole
> the size of the drill, and the drill is off, you end up with the
> copper not touching the edge of the hole.
>
> In PCB there's a "drill helper" option that tells it to etch a small
> hole (about 10 mil) at the center point to help you center the drill
> bit, but not big enough to cause problems with off-center holes.
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>
>