Hi Clint,
I send you an email, but I haven't gotten a reply yet. Are you still
interested? If so, send me an email at
chemistrypaul@...Cheers,
Paul
--- In
Homebrew_PCBs@yahoogroups.com, "clintonlcorbin" <clcorbin@...>
wrote:
>
> Paul,
>
> I've been looking at trying direct PCB printing. I'll take the whole
> works off your hands if you haven't already sold it.
>
> Clint
>
> --- In Homebrew_PCBs@yahoogroups.com, "hal91k" <chemistrypaul@> wrote:
> >
> > Hi Everyone,
> >
> > A while back, I worked on using a Epson C84 printer to print PCB's
> > (following http://techref.massmind.org/techref/pcb/etch/c84-st.htm)
> >
> > Although it was fun developing this, I no longer have the time to
> > continue making PCB. So, I'm selling everything I have related to
> > Inkjet PCB printing. As such, I can't provide support either.
> >
> > If nobody buys these in a week or so, I'll give these away to anyone
> > who wants them (provided they pay shipping).
> >
> > Modified Epson C84 Printer $10 - Epson printer without housing and
> > repositioned paper input sensor. Includes a sheet metal feeder plate
> > that I made. No ink cartridges. Comes with power cable.
> > http://img511.imageshack.us/img511/4729/c84backbe5.jpg
> > http://img374.imageshack.us/img374/4638/c84frontih2.jpg
> >
> >
> > Epson C84 $10 - A unmodified printer that I never got around to
> > working on. The paper feeder tray seems broken, but that doesn't
> > affect conversion to a PCB printer. Contains the old, original
> > cartridges. No cables.
> > http://img511.imageshack.us/img511/2465/c84pj9.jpg
> >
> >
> > C84 cartridge refilling supplies $10 -
> > Includes:
> > ∗ 4 clear refillable cartridges - one with an auto-reset chip, the
> > rest with original chips that need to be manually reset. 2 of those
> > have been used with yellow, the other two with magenta
> > ∗ the original 4 cartridges (empty)
> > ∗ cartridge resetter (it resets the chip so that the printer thinks
> > that the cartridge is full after you filled it with ink)
> > ∗ 2oz bottle of C84 head cleaning fluid (almost full)
> > ∗ 2oz bottle of Yellow MISPRO ink (almost empty)
> > ∗ 2oz bottle of Magenta MISPRO ink (~1/3 full)
> > ∗ 2 syringes with blunt needles (one used for yellow, the other for
> > magenta)
> > http://img374.imageshack.us/img374/7925/suppliesgw2.jpg
> >
> >
> > PCB Etchant $1 - Radio Shack ferric chloride. (~7/8 full) Apparently
> > they cost $10/bottle now, as seen at radioshack.com.
> > http://img293.imageshack.us/img293/5796/etchantrp8.jpg
> >
> > I also have a few sheets of thin copper-clad that I can throw in.
> >
> > Buyer to pay shipping - probably $5-10
> >
> > Cheers,
> > Paul
> >
>