Paul,
I've been looking at trying direct PCB printing. I'll take the whole
works off your hands if you haven't already sold it.
Clint
--- In Homebrew_PCBs@yahoogroups.com, "hal91k" <chemistrypaul@...> wrote:
>
> Hi Everyone,
>
> A while back, I worked on using a Epson C84 printer to print PCB's
> (following http://techref.massmind.org/techref/pcb/etch/c84-st.htm)
>
> Although it was fun developing this, I no longer have the time to
> continue making PCB. So, I'm selling everything I have related to
> Inkjet PCB printing. As such, I can't provide support either.
>
> If nobody buys these in a week or so, I'll give these away to anyone
> who wants them (provided they pay shipping).
>
> Modified Epson C84 Printer $10 - Epson printer without housing and
> repositioned paper input sensor. Includes a sheet metal feeder plate
> that I made. No ink cartridges. Comes with power cable.
> http://img511.imageshack.us/img511/4729/c84backbe5.jpg
> http://img374.imageshack.us/img374/4638/c84frontih2.jpg
>
>
> Epson C84 $10 - A unmodified printer that I never got around to
> working on. The paper feeder tray seems broken, but that doesn't
> affect conversion to a PCB printer. Contains the old, original
> cartridges. No cables.
> http://img511.imageshack.us/img511/2465/c84pj9.jpg
>
>
> C84 cartridge refilling supplies $10 -
> Includes:
> ∗ 4 clear refillable cartridges - one with an auto-reset chip, the
> rest with original chips that need to be manually reset. 2 of those
> have been used with yellow, the other two with magenta
> ∗ the original 4 cartridges (empty)
> ∗ cartridge resetter (it resets the chip so that the printer thinks
> that the cartridge is full after you filled it with ink)
> ∗ 2oz bottle of C84 head cleaning fluid (almost full)
> ∗ 2oz bottle of Yellow MISPRO ink (almost empty)
> ∗ 2oz bottle of Magenta MISPRO ink (~1/3 full)
> ∗ 2 syringes with blunt needles (one used for yellow, the other for
> magenta)
> http://img374.imageshack.us/img374/7925/suppliesgw2.jpg
>
>
> PCB Etchant $1 - Radio Shack ferric chloride. (~7/8 full) Apparently
> they cost $10/bottle now, as seen at radioshack.com.
> http://img293.imageshack.us/img293/5796/etchantrp8.jpg
>
> I also have a few sheets of thin copper-clad that I can throw in.
>
> Buyer to pay shipping - probably $5-10
>
> Cheers,
> Paul
>