Hi Everyone,
A while back, I worked on using a Epson C84 printer to print PCB's
(following
http://techref.massmind.org/techref/pcb/etch/c84-st.htm)Although it was fun developing this, I no longer have the time to
continue making PCB. So, I'm selling everything I have related to
Inkjet PCB printing. As such, I can't provide support either.
If nobody buys these in a week or so, I'll give these away to anyone
who wants them (provided they pay shipping).
Modified Epson C84 Printer $10 - Epson printer without housing and
repositioned paper input sensor. Includes a sheet metal feeder plate
that I made. No ink cartridges. Comes with power cable.
http://img511.imageshack.us/img511/4729/c84backbe5.jpghttp://img374.imageshack.us/img374/4638/c84frontih2.jpgEpson C84 $10 - A unmodified printer that I never got around to
working on. The paper feeder tray seems broken, but that doesn't
affect conversion to a PCB printer. Contains the old, original
cartridges. No cables.
http://img511.imageshack.us/img511/2465/c84pj9.jpgC84 cartridge refilling supplies $10 -
Includes:
∗ 4 clear refillable cartridges - one with an auto-reset chip, the
rest with original chips that need to be manually reset. 2 of those
have been used with yellow, the other two with magenta
∗ the original 4 cartridges (empty)
∗ cartridge resetter (it resets the chip so that the printer thinks
that the cartridge is full after you filled it with ink)
∗ 2oz bottle of C84 head cleaning fluid (almost full)
∗ 2oz bottle of Yellow MISPRO ink (almost empty)
∗ 2oz bottle of Magenta MISPRO ink (~1/3 full)
∗ 2 syringes with blunt needles (one used for yellow, the other for
magenta)
http://img374.imageshack.us/img374/7925/suppliesgw2.jpgPCB Etchant $1 - Radio Shack ferric chloride. (~7/8 full) Apparently
they cost $10/bottle now, as seen at radioshack.com.
http://img293.imageshack.us/img293/5796/etchantrp8.jpgI also have a few sheets of thin copper-clad that I can throw in.
Buyer to pay shipping - probably $5-10
Cheers,
Paul