Well that just s∗cks. :D The Epson 1280 has been sitting idle for about 2
years now. It would be simpler to replace it than try to clean out the print
heads.
Are you using pigment based inks? Or dye-based? Black only?
----- Original Message -----
From: "DJ Delorie" <dj@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Monday, June 23, 2008 12:25 AM
Subject: Re: [Homebrew_PCBs] UV LED box
>
> DJ Delorie <dj@...> writes:
>> Still etching, but it looks like it only gives 3 steps of useful
>> range, vs 8 steps for the inkjet. Under a microscope with
>> back-lighting, the toner is not as opaque as you'd think.
>
> Done. Only one step was useful; the one above it was completely
> etched away and the one below it had shorts. Also, the vellum itself
> took three steps of the exposure. So, it's a bad combination of
> uv-blocking paper with uv-passing toner :-(
>
> ------------------------------------
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBsYahoo! Groups Links
>
>
>