You might want to have a look at 'HPGS', an open source app to convert HPGL
files to eps or png.
I made a pcb plotter a while back, and used HPGS to convert HPGL to EPS
format. The reason i used it and not the PS output from the CAM processor is
that the EPS output from HPGS looks a lot neater and was easier to parse
from my plotter program. Depending on your scripting or coding skills, it
might be possible to write something to tile your board layouts.
On Mon, May 5, 2008 at 12:31 PM, Matthew Smith <matt@...> wrote:
> Quoth Matthew Smith at 2008-05-05 11:42...
>
> > Quoth Andrew at 2008-05-05 10:59...
> >
> >> How about using vanilla gerbers and use
> >> a gerber veiwer to lay them up.
> >>
> >> Veiwmate by pentalogix is free and will
> >> do that. The free version wont let you
> >> save layups though.
>
> OK - I went into Eagle and selected GERBER as the device. It wants a
> wheel file. What's a wheel file?
>
> --
> Matthew Smith
> Smiffytech - Technology Consulting & Web Application Development
> Business: http://www.smiffytech.com/
> Personal: http://www.smiffysplace.com/
> LinkedIn: http://www.linkedin.com/in/smiffy
>
>
[Non-text portions of this message have been removed]