Thank you! I have ordered some 1/32" boards for testing it out with. I'm
glad to hear it works well for someone. I purchased the laminator and left
it in the box just in case someone said it doesn't work so I can return it.
:) Now I have to remember to send in the rebate.
On 2/24/08, niponcio <niponcio@...> wrote:
>
> Ive been using this laminator, I think it works great, I have managed
> to get traces down to 0.008" (they tend to get a little thicker with
> the paper Im using) with a clearance of .01". I set it on temp 5 and
> pass the board 3 times.
>
> Then I lower the temp to 2 and apply the green foil (2 passes).
>
> The only problem is that if you plan to use 1/16" thick copper clads,
> you have to help them pass through. 1/32" cooper clads work great,
> which, for what Ive seen is not a problem if you live in the states
> because they are just about the same price, or at least thats what
> digikey says. (I have to work mostly with 1/16 because, where I live
> they are really cheap and they are the only ones available)
>
[Non-text portions of this message have been removed]