Hi,
i use black and it looks great.
You need to transfer it without the white paper fuzz or remove that afterward.
But then, i'm using PCB stock that is very yellow in color. With the
almost transparent FR4 you might have less visibility, but i would
expect it to be OK.
I found that it does not hold well on the smooth side of single-sided
stock. It sticks like crazy to the epoxy where copper was etched away
(rough surface). But i have mostly double sided stock anyway.
ST
On Dec 3, 2007 5:07 PM, Dave <theschemer@...> wrote:
> How are you guys doing the silkscreen layer to the component side of the
> board? I only have a black laser printer. Don't tell me I need to buy a
> color one too? :) Is that the usual way and does black work ok when
> using the TT method for this?
> Thanks,
> Dave
>
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
> Yahoo! Groups Links
>
>
>
>
>