Lee Studley <
indigo_red@...> writes:
> I'm impressed with this link. I thought you guys were all talking
> ancient dip 0.1" spacing stuff wiht the TT technique. That board is
> impressive at that link. I'm going to try it.
0.1" is HUGE! ;-)
So yeah, go try it. 8 mil is easy with TT. Here's more inspiration:
http://www.delorie.com/pcb/smd-challenge/old/proto-boards.htmlThe biggest part on that is 0805; the traces are all 8 mil. The
smallest parts are a 0.4mm pitch TVSOP and a 01005 cap (that's 0.010"
by 0.005").
http://www.delorie.com/pcb/first.htmlThat's a close-up of a 01005 capacitor hand-soldered to 8 mil traces.
The copper on the right edge is for the 0.4mm TVSOP.
http://www.delorie.com/pcb/liquidtin/A buck regulator. The smallest parts are 0603.