--- In
Homebrew_PCBs@yahoogroups.com, "docstein99" <docstein99@...>
wrote:
>
> I'm very impressed! Fortunately, I do have a cnc milling machine so
> making a feed tray shouldnt be a problem. Some more research I found
> the lowest price for the printer is $79 at comp-usa. Reading closer
I
> found that other price was a mail-in rebate if you bought the printer
> and also a camera :(
>
well i made a small cd size pcb disk .5mm board
i had mixed results weep !!
becouse i didnt fry the board long enough
over direct heat i see after a re read {i'm too quick you see }
instead i oven baked it
ehhh eehhehehhehe !!
so ive reprited it
thou did rediscover dipping pcb in etchant for a few seconds
cleans the pcb board well
and makes it a nicer surface for the next print !
this time ill dry it over night then bake it over the ring this time
and report the result tomorrow
the silk screen worked very well a nice end ,,,
i recon direct application of an art fixer spray
is enought to seel it for good
see the pics one edaboard link in previous posts