On Thu, 08 Mar 2007 13:46:52 +0100, Paul Sturpe <
sturpe@...>
wrote:
> Stefan,
> I finally got started to dis-assemble the C84. This gives me a
> better look at the mechanism. I have cleaned the parking pad, but I
> don't see the vacuum hose you talk about. Can you give me directions
> of where to look for the vacuum hose?
> Thanks,
> Paul
It sucks through the black pad right under the head, so it is attached at
the underside of that plastic part. I think there is even a way to lift
that part without removing any screws, but i'm not certain. There is a
single screw holding the whole parking station on the inside of the
printer, the outside edge is held with a spring catch.
ST