On Wed, 14 Feb 2007 16:36:10 +0100, Thomas <
teecee@...> wrote:
> Gents, is it possible to start a list or a "Wikidirectprinter Hacks"
> kinda deal that members can add there experiences as to what works and
> doesn't work .... Printer , Ink used, Temps for curing, comments and
> results with a few pic's.
> Thomas
At least 3 were started.
<
http://techref.massmind.org/techref/pcb/etch/directinkjetresist.htm>
I started another <
http://dipcb.schtuff.com/>, which has only ever seen
use to upload some pictures, i have no time or inclination at this moment
to work on it, you are welcome to ownership if you are offering.
There's also the one Phil made
<
http://pcbwiki.philpem.me.uk/wiki/Main_Page>
As you can see, James is the only one who actually put work into it and
made something. Several people have come to inkjet development via his
page, it's great he put the information up.
All the other stuff (including from myself) is just hot air, starting a
wiki is easy finding time to maintain one is not. It has been suggested to
use a wiki a hundred times on this list, for various topics, never once
did something really grand come from it, as far as i know. Nobody is
prepared to put his time where his mouth is, and i can well understand
that.
Just forget it, and read everything you can right here on this list, which
is _THE_ place where this information is shared. Or if you really want to
work on a Wiki, ask James his seems most promising. You are also welcome
to mine (although i believe the host is not all that practical), and I'm
sure Phil would welcome you to write articles on his space too.
I don't think a wiki is really all that helpful, it only shows "one
version" of the facts, and is hard to keep up to date. Here you get all
the data and can ask for clarification too, it's really as good as it
gets. In a way i even prefer if there is no wiki, since it means all the
info is coming through here and i don't have to keep up with some other
place as well.
ST