On Thursday 08 February 2007 21:00, Russell Shaw wrote:
> Gary Hoyles wrote:
> > I'm about to get a new laser printer as the last one popped due to power
> > lines falling down here in high winds a few weeks ago and put 450 Volts
> > into mains system.
>
> Replace the fuse in it. If it still blows, replace the main electrolytic
> and/or switch-mode regulator transistor.
>
> > <snip<
Also check for surge supressors (may look like a big disc ceramic cap); many
of them fail in short mode 8o((.
--
Keith Bowers - Thomasville, NC