Was this the standard Epson ink?
Interesting, I had asked the thread not too long ago what to use to
remove the ink off of cured boards and ammonia was mentioned for use
in removing the cured ink.
Joseph
--- In Homebrew_PCBs@yahoogroups.com, William Nelson <wnnelson@...> wrote:
>
> Reducing the fluid in the ink sounds like a hard way to go. If it
works good that will also be a
> bonus. I had my head clog up bad after I installed the magenta ink
in all the slots. It wouldn't
> even print the test pattern. I tried a couple of the fixes I read
about but the windex directly
> through the head worked great. I filled a syringe with windex and
used a peice of tubing to get it
> into the nipple. I moved the head to the left and watched the windex
flow out the jets. After it
> worked perfect.
>