Hi, jumping in for the first time on the list,
On the subject of rivets/eyelets, this link may be of interest. (not sure
if they have been mentioned before)
http://www.intl-eyelets.com/ They seem to have the same tools (and better pictures) and parts,
hopefully at a better price.
Not sure if they do small orders, maybe a group purchase could be arranged.
-carl
At 12:57 PM 5/12/2003, you wrote:
>is the price there given in per pack of 100 pieces? or am i wrong?
>then it would be VERY expensive.
>
>but the picture of the riveting tool is nice. it is exactly what i thought of.
>even the moveable center piece is exactly like i would have done it.
>but i believe it would also work without the center rod.
>
>the form tool seems very straightforward, it should be easy to make this
>on a lathe (yea of course i
>have none! hope to be able to do this with a drill press.....).
>
>thank you for the links...
>but first i have to get the rivets....
>
>
>i'm glad to have helped you with this suggestion.
>i really think it is much easier then setting up a chemical process.
>(sure the results can't compete)
>
>regards
>stefan
>
>
>
>
>
>
>12.05.2003 09:23:42, Neil <cobra_neil@...> wrote:
>
> >Alrighty folks,
> >
> >Been busy for the past couple days, but I've come back with (hopefully)
> some
> >good news.... a source for eyelets....
> > http://www.circuittechctr.com/products/115-7000.htm
> >
> >They're not cheap (~$30 per 100), but if I continue to use my existing
> >technique of designing boards so that they require very few plated-thru
> >holes, this might solve the problem for the few holes that do require
> plating
> >thru.
> >
> >Some technical details on the press tool...
> > http://www.circuittechctr.com/products/110-5202.htm
> >
> >Other good description of usage...
> > http://www.circuittechctr.com/guides/5-3.htm
> >
> >Also some great info on PCB repair...
> > http://www.circuittechctr.com/guides/3-0.htm
> >
> >Peruse the site -- there's lots of good info there.
> >
> >Cheers,
> >-Neil.
> >
> >
> >