Actually I've been debating whether to set up a quick PCB prototype
fabrication outfit myself. I guess the iron-on toner technique works pretty
well? Actually I have a UV exposure box so I probably could use positive
resist pre-coated boards easier. I already have a small milling machine. My
biggest hesitation has been what software to use for layout. It's so easy
with ExpressPCB I've gotten spoiled. But you're right, it is expensive. I
also would need a high-speed spindle.
Any software/spindle recommendations?
--
Phil Mattison
http://www.ohmikron.com/Motors::Drivers::Controllers::Software
----- Original Message -----
From: lcdpublishing <lcdpublishing@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Wednesday, December 27, 2006 10:50 AM
Subject: [Homebrew_PCBs] Re: Newbie to list, old timer to this hobby and
others
> I agree with what Dave stated. The economics just are not there for
> me. I can buy a bunch of PCB stock on Ebay very cheap. I can print
> a lot of layouts on a laser printer very cheap. The Ferric chloride
> for etching is cheap, the ironing process is cheap, drilling the
> holes is cheap. All of the above is also pretty easy once you get
> the hang of it - much easier than doing your own PCB design and
> electronics design which brings me to the real reason why!!!
>
> Being green about electronics, most of my designs do not work first
> time out. Most of the stuff I have been designing does not lend
> itself well to breadboarding or even perf boards. So, I do the best
> I can in the design, layout the circuit, and make the PCBs myself.
> If things go as usual, I may make the same board 3 or 4 times in one
> day and that is very key for me. I don't like waiting 1 week, 2
> weeks, 3 weeks, etc. for something I can do right now.
>
> So, really, there are two primary advantages to making PCBs at home;
> Economics and Instant gratification :-)
>
> Chris
>