--- In
Homebrew_PCBs@yahoogroups.com, "jpanhalt" <janhalt@...> wrote:
>
> --- In Homebrew_PCBs@yahoogroups.com, "Tony Smith" <ajsmith@>
> wrote:
> >
> > > Thanks for answering my message. I didn't expect to get so
> > > many replies so soon!
> > >
> > > It sounds like this product I'm looking for is rare or
> > > non-existant because I think one of the people that answered
> > > would have heard
> > > something like this. But just for fun, let me elaborate.
This
> is
> > > what I'm looking for:
> > >
> > > 1) Start with a double sided copper clad pcb for etching.
> > > 2) Drill (or punch) holes every .1" horizontally and
> > > vertically in a grid (like perfboard).
> > >
> > > A single sided board drilled so would also be useful, because
> > > for those occasional times when you need to send wires over
> > > the other side to cross over other traces, you at least have
> > > the holes for the pads predrilled.
>
>
> I believe Injectorall makes what is being described on FR4
(B3426D);
> DigiKey #PC44P-ND. John
>
This may fit the bill, though I wish I could get a picture of this so
I can make sure its not pretinned. The correct Digikey PN seems to
be B3426D-ND.
Thanks,
Don