--- In
Homebrew_PCBs@yahoogroups.com, "Tony Smith" <ajsmith@...>
wrote:
>
> > Thanks for answering my message. I didn't expect to get so
> > many replies so soon!
> >
> > It sounds like this product I'm looking for is rare or
> > non-existant because I think one of the people that answered
> > would have heard
> > something like this. But just for fun, let me elaborate. This
is
> > what I'm looking for:
> >
> > 1) Start with a double sided copper clad pcb for etching.
> > 2) Drill (or punch) holes every .1" horizontally and
> > vertically in a grid (like perfboard).
> >
> > A single sided board drilled so would also be useful, because
> > for those occasional times when you need to send wires over
> > the other side to cross over other traces, you at least have
> > the holes for the pads predrilled.
I believe Injectorall makes what is being described on FR4 (B3426D);
DigiKey #PC44P-ND. John