> ST
>
> Oh yea, "i told you so". ;-)
>
Lol you did.
BUT I'm getting such good resolution the quality is beyond beliefe,
easily matches the 600dpi output from my laser, and its a one step
process if I can get something thats a good etch resist in pen format.
Maybe I should be looking at a varnish, or something like the wax
dribbler from about 6 months/year ago.
The carrige can easily track accurately with a whole pack of blutack
holding my heavy w900 on the pen carrier so I guess could easily move
the whole dremel around at speed.
Only issue is pen up/down is a small spring and tiny solonoid, but
possibly upgradable to a bigger solonoid with a bit of switching.
I dont think I can change pen up/down delays but must be a good length
/ dumb delay to allow for slow heavy pens as it has no sensor feedback
to see when the pen hits the paper.
Now the pen down on the hp sounds like a hammer............
(but I'm putting that back on ebay)