Perfect, but pricey. On the other hand I like a good tool. I'll see if
Ebay has a cheaper version. Thanks for the link!!
Mike
--- In Homebrew_PCBs@yahoogroups.com, "Norm Carlberg" <normnet@...> wrote:
>
> Laminate to .188"
> Not tried on PBC's. Spring tension hinged top rollers.
> Used in sign shop for several years.
>
> http://www.usi-laminate.com/store/wpbec_viewItem.asp?idProduct=2115
>
> Norm
>
>
> ----- Original Message -----
> From: Mike Phillips
> To: Homebrew_PCBs@yahoogroups.com
> Sent: Tuesday, November 21, 2006 12:40 PM
> Subject: [Homebrew_PCBs] Laminator for .093" pcb.
>
>
> After reading thru the archives I don't see anyone trying to use a
> laminator for boards that are .093" thick. Is there a laminator that
> can be modified to be made adjustable so I can go as high as .093" ?
>
> I typically try to make a single sided board so it won't short to
> things on my bench. So drilling is not needed. I have used the clothes
> iron on the last .093" board. It worked fine, but the lines get
> expanded quite a bit from the excess uneven pressure.
>
> Mike
>
>
>
>
>
> [Non-text portions of this message have been removed]
>