>
> It's not as if anyone anywhere seems to have made a successful direct
> laser printed PCB like, ever.
>
> But you are welcome to try!
Well maybe its all in the printer, l may be lucky!
I think problem will be the 'static' wont be able to work through the
copper to pull the toner off the drum, possibly because the copper
gets earthed out by the chassis somewhere, but if it can be insulated,
maybe even carried on a plastic tray etc like a cd is in a cd printer,
then it may 'charge up', problem I see is you may have to make the
distance from the drum to the fuser at least the space of the largest
board you intend to print, ie say 30cm for 12∗8 boards.
maybe instead of a tray, a belt, like a conveyor system, with it
looped around the fuser roller back to the pressure roller under the
drum.