--- In
Homebrew_PCBs@yahoogroups.com, "schabtach" <adam@...> wrote:
>
> Just a heads-up in hopes of saving someone else from wasting their
> money like I just did: Pulsar Toner Transfer System paper doesn't work
> in my Samsung ML-2010 laser printer. The toner doesn't bond to the
> paper and lots of flakes get deposited on the paper "downstream" from
> the image. I sent email to Pulsar but since it's the weekend I don't
> expect to hear back from them for awhile. I'm guessing that this is
> the same problem as with Brother printers described on their site, but
> I don't actually know.
>
> --Adam
>
Have you tried with an HP? Just wondering, I'm about to order some of
the pulsar and green foil to try, but it'll be on a HP laser w/refilled
toner though.
So far on the Press n' peel white, I get decent boards, but I run them
thru a GBC 200 and a clothes iron - combo. Works with the photo paper I
get from (work) it's 80# stuff not glossy, 10mil traces are ok but big
ground planes are so - so, smaller boards come out great.2 1/2 x 2
1/2 size.
If you have any left over and don't want the rest of the Pulsar, I'll
buy it off of you to try out on the HP at work.
Charles