Hi Ross,
I can send you the videos directly the Pick and place is 6meg the
solder paste is 2 meg and the reflow with a hotplate is 1.5meg.
I have had this happen myself when too many people are looking at a
site or if my internet connection is doing too much.
Derek B.
www.hightechsystemsllc.com
On 9/19/06, Ross McKenzie <valusoft@...> wrote:
> Hi Derek.
>
> I don't know what the issue is...but I get a message saying "The
> specified server cannot be found" on both of these links after I attempt
> to start (after having read the introductory text).
>
> Regards,
>
> Ross McKenzie
> ValuSoft
> Melbourne Australia
>
>
> Derek Barger wrote:
>
> > I thought some might be interested to see a couple of video of a
> > homemade solder paste machine and Pick and place.
> > These were done on a Taig with DenverCNC controller using Mach2 and my
> > modular work holding system.
> > Steve and I did this along time ago but just recently got the video up
> > on Steve's site.
> >
> > http://www.ciciora.com/surface_mount.html
> > <http://www.ciciora.com/surface_mount.html>
> > http://www.ciciora.com/picknplace.html
> > <http://www.ciciora.com/picknplace.html>
> >
> > There is also a hotplate video melting the surface mount after the
> > pick and place was done.
> >
> > Derek B.
> > www.hightechsystemsllc.com
> >
> >
>
>
>
>
> Be sure to visit the group home and check for new Links, Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>