Thanks Stefan. I'll leave it with its present owner, I think.
Bill
----- Original Message -----
From: "Stefan Trethan" <stefan_trethan@...>
To: <Homebrew_PCBs@yahoogroups.com>
Sent: Tuesday, September 05, 2006 4:25 PM
Subject: Re: [Homebrew_PCBs] Epson C45
> On Tue, 05 Sep 2006 00:58:19 +0200, Bill Maxwell <wrmaxwell@...>
> wrote:
>
>> Anybody familiar with the Epson C45? One is available locally but I
>> have no
>> idea whether it might be suitable for direct pcb printing conversion.
>> Bill
>
>
> RESOLUTION (MAX) : 2880 x 720 optimised dpi using RPM technology
> NOZZLE CONFIGURATION : 48 nozzles (Black)
> 3 x 15 nozzles (Cyan, Magenta, Yellow)
>
> I'd rather not risk wasting time with one so old...
> It may work, but i don't think so.
>
> Better take one with 1440 dpi lengthwise resolution and more nozzles.
>
> ST
>
>
> Be sure to visit the group home and check for new Links, Files, and
> Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>
>
>
>