>If you have any suggestions or know of any photos showing
>PCB clamping, I sure would appreciate a link to the photos.
This photo was taken over a year ago. Since then I've dispensed with
the square jig and use the T-slot/bolt/washer combo on both sides of
the MDF. Cheap 3/4" masking tape around the edges holds the PCB to the
MDF. Originally, it was intended to be just a temporary solution but
it worked so well that I couldn't be bothered with anything more
elaborate.
http://www.pbase.com/eldata/image/65932023--- In
Homebrew_PCBs@yahoogroups.com, "lcdpublishing"
<lcdpublishing@...> wrote:
>