Turpentine works quite well, and is probably easier to find.
At an old job one I the things I had to do requarly was dismandle the lasers
and clear the rollers. We used to print labels - lots of labels - and
eventually the adhesive would build up.
Turpentine cleaned the rollers quite well, and removed a slight bit of
rubber, would probably soften up old ones too.
Chemists would have oil of wintergreen. It's one of those things that's
supposed to stop arthritis pain, etc.
Tony
> -----Original Message-----
> From: Homebrew_PCBs@yahoogroups.com
> [mailto:Homebrew_PCBs@yahoogroups.com] On Behalf Of Myc Holmes
> Sent: Wednesday, August 23, 2006 8:32 PM
> To: Homebrew_PCBs@yahoogroups.com
> Subject: Re: [Homebrew_PCBs] Tip: Repairing a HP LJ-III pickup roller.
>
> Try wintergreen flavoring from the grocery store. The main
> ingredient is oil of wintergreen.
>
> Myc
>
> On 8/22/06, Stefan Trethan <stefan_trethan@...> wrote:
> >
> > On Tue, 22 Aug 2006 15:29:04 +0200, YD <yd_br@...> wrote:
> >
> > >
> > > The result? Perfect! The roller has a nice rough rubber
> surface at
> > > what seems to be the original diameter. It's picked up
> every single
> > > sheet for months now without failure. Even better, when and if
> > > needed I can do it again and still have the cake, er, the
> original
> > > part.
> > > - YD.
> >
> >
> > Thank you!
> >
> > That is a good Tip for me, i recently bought a replacement for the
> > upper pickup roller (very cheap on ebay nobody wanted it), but this
> > way i can also fix the lower roller on my IIID.
> >
> > I tried sanding the original roller but it never worked any better,
> > glycerine did no good either,
> >
> > The "cracks" are "stock" with those rollers, they are there as
> > friction ridges (like one your hands and feet) to make it grip. But
> > the surface wears down and goes shiny as you observed and it just
> > won't work properly any more.
> >
> > BTW someone recently suggested a strange chemical to do just this
> > roller repair, it was called something crazy like oil of
> wintergreen
> > or something. Now my chemicals shop sells sea foam dust and dragon
> > blood but i don't think they have heard of that wintergreen
> stuff. I
> > looked it up and it is methyl salicylate, but that don't show up on
> > their inventory list either, maybe it has another name i'm
> not aware of.
> >
> >
> > ST
> >
> >
> > Be sure to visit the group home and check for new Links, Files, and
> > Photos:
> > http://groups.yahoo.com/group/Homebrew_PCBs
> >
> > If Files or Photos are running short of space, post them here:
> > http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Be sure to visit the group home and check for new Links,
> Files, and Photos:
> http://groups.yahoo.com/group/Homebrew_PCBs
>
> If Files or Photos are running short of space, post them here:
> http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
> Yahoo! Groups Links
>
>
>
>
>
>
>