Correct,
The tray is only about 1/2 width. The printer has a clear area from
front to back ONLY in the area where that tray feeds through.
Oddly, it starts out with you feeding the tray in from the front of
the printer unlike paper which goes in the back.
When you open the "Special door" for the CD tray, it lifts the print
head assembly up for the extra clearance.
When I tore mine apart most of the way, I found "Something" blocking
the path for sheet feeding from the back. I didn't have time to dig
deeper to find out what is there though. My plan, if I ever get
time to work on it again, is to NOT use the CD printing functions.
Rather, to remove everything in the way for feeding the stock in
from the back side. I am hoping to trick the printer into thinking
it is printing on regular paper.
--- In
Homebrew_PCBs@yahoogroups.com, "Stefan Trethan"
<stefan_trethan@...> wrote:
>
> On Mon, 07 Aug 2006 21:05:58 +0200,
<
Homebrew_PCBs@yahoogroups.com> wrote:
>
> >
> > File : /Direct_Inkjet_Resist_Printing/EPSON R220
> > Printer/R220-CD-Tray-1.jpg
>
>
> I see so these trays are not full width....
>
> But still i think you could cut away all those ribs that prevent a
square
> CD to be printed.
>
> How does the printer adjust the head height so that the head does
not
> crash into the tray? Is there some lifting mechanism?
>
>
> ST
>