I just do single sided boards. Good point regarding double sided
boards and pre-heating.
At 10:19 PM 7/29/2006, alan00463 wrote:
>--- In Homebrew_PCBs@yahoogroups.com, Mike <k4gmh@...> wrote:
> >
> > Another approach I've successfully used for TT is
> > to heat the PCB in an oven to ~300 F and then
> > apply the TT material. Use an iron to further
> > raise the temp of the board to get full
> > transfer. The idea is to get the board almost to
> > the proper temp,, apply the TT material and then
> > finish raising the PCB to the proper temp. with the iron for a good
>transfer.
>
>That sounds easy. Except for one thing. How
>do you align the TT material on the 300 degF PCB?
>
>
>
>
>
>
>
>Be sure to visit the group home and check for new Links, Files, and Photos:
>http://groups.yahoo.com/group/Homebrew_PCBs
>
>If Files or Photos are running short of space, post them here:
>http://groups.yahoo.com/group/Homebrew_PCBs_Archives/
>Yahoo! Groups Links
>
>
>
>
[Non-text portions of this message have been removed]