--- In
Homebrew_PCBs@yahoogroups.com, "Herbert E. Plett"
<cachureos@...> wrote:
SNIP
> > I tried using a glossy magazine page but it jammed in my printer and
> > the paper I listed above jams about every other time, what kinds of
> > paper do you find works well? I'm using a Brother HL-2040.
>
> always use a 'base' sheet and stick only a piece of TT paper to it
with paper
> masking tape or laser labels. print first a draft on the base and
then you know
> exactly where to place the (1/4" oversized) transfer paper. the
re-print with
> your best settings.
>
So for the base sheet just use regular printer paper and then tape a
piece of the paper I'll do the actual transfer with onto it (be it
magazine, photo, whatever), and cut the piece of paper so it has 1/4"
extra hanging off of each side of the board, right?
What do you think of using some sort of paint on top of the traces to
strengthen them and avoid pinholes?
Thanks very much for all the help!
Seth