Myc Holmes wrote:
> and position of the moon.....
>
> add to the list of variables: the type of toner.
>
> You just have to find the right combination that works for you.
I've just tried the Epson "Premium glossy photo paper", which appears to have
a plastic coating on it. That coating seems to prevent it from absorbing
water, which means it won't come off the board after it's done. Plus it's
probably way too thick (255gsm), which makes it a little hard to get the heat
through the paper and to the toner. Apparently the Photo Quality Glossy Paper
is 140gsm; somewhere between thick copier paper and thin card.
I've got a HP sample pack here that I'm going to have a play with. Hopefully
some of the paper in there will work...
Does anyone want to swap 19 sheets of Epson S041706 10x15cm premium glossy for
some of the Photo Quality Glossy Paper? Nah, didn't think so...
--
Phil. | Kitsune: Acorn RiscPC SA202 64M+6G ViewFinder
philpem@... | Cheetah: Athlon64 3200+ A8VDeluxeV2 512M+100G
http://www.philpem.me.uk/ | Tiger: Toshiba SatPro4600 Celeron700 256M+40G